Skip to main content
Request a Training Proposal

Instructor-led training

Configuring Cisco Nexus 7000 Switches v3 Training in Arcata, California

This course is designed primarily for systems and field engineers who install and implement Cisco Nexus 7000 Series Switches.

Request a Training Proposal View Course Outline

What you'll learn

This course is designed primarily for systems and field engineers who install and implement Cisco Nexus 7000 Series Switches. This course will cover the key components and operations required to enable you to configure, manage, and troubleshoot the Cisco Nexus 7000 Switch platform.

Prerequisites

The knowledge and skills that you must have before attending this course are as follows: Good understanding of networking protocols, routing, and switching Cisco Certified Network Associate (CCNA) Suggested attendance at the Implementing Cisco IP Routing (ROUTE) class Suggested attendance at the Implementing Cisco IP Switched Networks (SWITCH) class.

Course Outline

Lesson 1: Describing Cisco Nexus 7000 Series Switches

    Describing the Cisco Nexus 7000 Switch
    Describe data center requirements that are addressed by the Cisco Nexus 7000 Switch
    Describe the key unified fabric features
    Describe the Cisco Nexus product family
    Describing Cisco Nexus 7000 Series Switch Features in General
    Describe the Cisco NX-OS software features
    Describe the key features of the Cisco Nexus 7000 Switch
    Describing the Cisco Nexus 7000 Switch Deployment Models
    Describe Cisco Nexus 7000 Series Switch deployment models
    Access the correct reference materials when required (useful links: Cisco.com, product websites)

 
Lesson 2: Cisco Nexus 7000 Series Switch Hardware Architecture, Device Installation, and Administration Features

    Describing Cisco Nexus 7000 Series Switch Hardware Architecture
    Describe the Cisco Nexus 7000 Switch chassis
    Describe the supervisor module and I/O module features, fabric module capacity, and redundancy capability
    Describe VOQ operation
    Describe packet flow and arbitration across the fabric
    Describe key features of the Cisco Nexus 7000 Switch power supplies and fan cooling systems
    Describe key hardware high-availability features
    Installing Cisco Nexus 7000 Series Switches
    Perform the hardware installation
    Verify the hardware installation using LEDs
    Verify the hardware installation using show commands
    Troubleshoot hardware issues
    Configuring Device Administration and Management Features
    Describe the management interfaces available on the Cisco Nexus 7000 Series Switch
    Use the Cisco NX-OS setup utility to configure Cisco Nexus 7000 Series Switch connectivity for system management
    Configure the user management feature on the Cisco Nexus 7000 Series Switch
    Configure system management features on the Cisco Nexus 7000 Series Switch
    Perform configuration backup and restore
    Perform in-service software upgrades and downgrades
    Perform Cisco NX-OS recovery
    Perform an electronic programmable logic device (EPLD) image upgrade
    Using the Troubleshooting Process and Tools
    Describe the troubleshooting process that can be used to identify issues on the Cisco Nexus 7000 Series Switch
    Identify the features that can be used to gather information on the Cisco Nexus 7000 Series Switch
    Use the embedded Ethanalyzer feature on the Cisco Nexus 7000 Series Switch
    Configure the SPAN feature on the Cisco Nexus 7000 Series Switch
    Configure the NetFlow feature on the Cisco Nexus 7000 Series Switch
    Configure system message logging on the Cisco Nexus 7000 Series Switch
    Configure Cisco GOLD on the Cisco Nexus 7000 Series Switch
    Use the OBFL feature to identify critical events that have occurred
    Configure the RMON feature on the Cisco Nexus 7000 Series Switch
    Configure Cisco EEM to respond to events that occur on the Cisco Nexus 7000 Series Switch

 
Lesson 3: Cisco Nexus 7000 Series Switch Software Architecture and Features

    Describing Cisco NX-OS Software
    Describe the Cisco NX-OS Software architecture
    Identifying key features of the Cisco NX-OS Software
    Survey Cisco NX-OS CLI basic commands
    Explain licensing features of the Cisco Nexus 7000 Switch
    Configuring Virtual Device Contexts on Cisco Nexus 7000 Series Switches
    Explain the purpose and use of VDCs
    Configure VDCs on the Cisco Nexus 7000 Switch
    Configure VDC resource templates
    Configure the management settings for VDCs
    Configuring Layer 2 Switching Features
    Configure basic interface parameters on Cisco Nexus 7000 Switch interfaces
    Configure Layer 2 interfaces on the Cisco Nexus 7000 Switch
    Configure VLANs on the Cisco Nexus 7000 Switch
    Configure PVLANs on the Cisco Nexus 7000 Switch
    Configure STP extensions on the Cisco Nexus 7000 Switch
    Configure Q-in-Q VLAN tunnels on the Cisco Nexus 7000 Switch
    Configuring Port Channels
    Configure port channels on the Cisco Nexus 7000 Switch
    Evaluate the use and benefits of vPCs in the network
    Explain the architecture and components of vPCs
    Configure vPCs on the Cisco Nexus 7000 Switch
    Configuring the Cisco Nexus 7000 Series Switch with the Cisco Nexus 2000 Series Fabric Extender
    Describe the Cisco Nexus 2000 Fabric Extenders
    Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender supported topologies
    Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender features
    Configure Cisco Nexus 2000 Fabric Extenders
    Configuring Cisco FabricPath
    Describe Cisco FabricPath architecture
    Explain Cisco FabricPath features on the Cisco Nexus 7000 Switch
    Configure Cisco FabricPath in the data center architecture
    Explain TRILL
    Configuring Layer 3 Switching Features
    Describe the unicast and multicast RIB and FIB on the Cisco Nexus 7000 Switch
    Explain Layer 3 interaction from F1 to M1 I/O modules on the Cisco Nexus 7000 Switch
    Configure the different routing protocols that are supported by the Cisco Nexus 7000 Switch
    Configure BFD on the Cisco Nexus 7000 Switch
    Configure the Route Policy Manager on the Cisco Nexus 7000 Switch
    Configure Layer 3 virtualization on the Cisco Nexus 7000 Switch
    Configure PBR on the Cisco Nexus 7000 Switch
    Configure FHRPs on the Cisco Nexus 7000 Switch
    Configure PIM-SM on the Cisco Nexus 7000 Switch
    Troubleshooting Layer 2 and Layer 3
    Verify Layer 2 issues on the Cisco Nexus 7000 Switch
    Troubleshoot vPC issues on the Cisco Nexus 7000 Switch
    Troubleshoot issues with Cisco FabricPath
    Troubleshoot Layer 3 issues on the Cisco Nexus 7000 Switch
    Configuring MPLS
    Explain the terminology in an MPLS environment
    Explain the MPLS features of the Cisco Nexus 7000 Switch
    Configure the MPLS features on the Cisco Nexus 7000 Switch
    Configuring Cisco OTV
    Explain the terminology, network, and use of multihomed sites and load balancing in a Cisco OTV environment
    Configure basic Cisco OTV features on the Cisco Nexus 7000 Switch
    Configure advanced Cisco OTV features on the Cisco Nexus 7000 Switch
    Configuring Locator/ID Separation Protocol
    Describe the terminology in an LISP environment
    Describe LISP features of the Cisco Nexus 7000 Series Switch
    Configure LISP features on the Cisco Nexus 7000 Series Switch
    Configuring FCoE
    Describe the terminology in an FCoE environment
    Describe FCoE features on the Cisco Nexus 7000 Series Switch
    Configure FCoE features on the Cisco Nexus 7000 Series Switch
    Configuring Security Features
    Identify the security features that are available on the Cisco Nexus 7000 Switch
    Configure ACLs on the Cisco Nexus 7000 Switch and verify the configuration
    Configure port security on the Cisco Nexus 7000 Switch and verify the configuration
    Configure DHCP snooping on the Cisco Nexus 7000 Switch and verify the configuration
    Configure DAI on the Cisco Nexus 7000 Switch and verify the configuration
    Configure IP Source Guard on the Cisco Nexus 7000 Switch and verify the configuration
    Configure uRPF on the Cisco Nexus 7000 Switch and verify the configuration
    Configure traffic storm control on the Cisco Nexus 7000 Switch and verify the configuration
    Configure CoPP on the Cisco Nexus 7000 Switch and verify the configuration
    Configure Cisco TrustSec on the Cisco Nexus 7000 Switch and verify the configuration
    Configuring QoS
    Identify the purpose of QoS
    Explain how QoS is implemented on the Cisco Nexus 7000 Switch and the default behaviors
    Configure QoS features with MQC
    Configure QoS classification on the Cisco Nexus 7000 Switch
    Configure marking for QoS on the Cisco Nexus 7000 Switch
    Configure mutation mapping for QoS on the Cisco Nexus 7000 Switch
    Configure QoS policing on the Cisco Nexus 7000 Switch
    Configure QoS queuing and scheduling on the Cisco Nexus 7000 Switch
    Configure network QoS, queuing and scheduling, and priority flow control on Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet modules
    Monitor QoS statistics on the Cisco Nexus 7000 Switch
    Troubleshooting Memory and Packet Flow Issues
    Evaluate Cisco Nexus 7000 Switch memory using the built-in platform monitoring tool
    Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a high level
    Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a detailed level
    Troubleshoot packet flow issues on the Cisco Nexus 7000 Switch

 
Lab Outline

    Lab 2-1: Cisco Nexus 7000 Platform Discovery
    Lab 2-2: Configuring User Management
    Lab 2-3: Configuring System Management
    Lab 2-4: Configuring Troubleshooting Features
    Lab 3-1: Configuring Layer 2 Switching
    Lab 3-2: Configuring Virtual Port Channels
    Lab 3-3: Configuring Cisco FabricPath
    Lab 3-4: Configuring Layer 3 Switching
    Lab 3-5: Configuring FHRP
    Lab 3-6: Troubleshooting vPCs and Cisco FabricPath
    Lab 3-7: Configuring MPLS
    Lab 3-8: Configuring Cisco OTV
    Lab 3-9: Configuring LISP
    Lab 3-10: Configuring FCoE
    Lab 3-11: Configuring Security Features
    Lab 3-12: Configuring QoS

Lesson 1: Describing Cisco Nexus 7000 Series Switches

  • Describing the Cisco Nexus 7000 Switch
  • Describe data center requirements that are addressed by the Cisco Nexus 7000 Switch
  • Describe the key unified fabric features
  • Describe the Cisco Nexus product family
  • Describing Cisco Nexus 7000 Series Switch Features in General
  • Describe the Cisco NX-OS software features
  • Describe the key features of the Cisco Nexus 7000 Switch
  • Describing the Cisco Nexus 7000 Switch Deployment Models
  • Describe Cisco Nexus 7000 Series Switch deployment models
  • Access the correct reference materials when required (useful links: Cisco.com, product websites)

 
Lesson 2: Cisco Nexus 7000 Series Switch Hardware Architecture, Device Installation, and Administration Features

  • Describing Cisco Nexus 7000 Series Switch Hardware Architecture
  • Describe the Cisco Nexus 7000 Switch chassis
  • Describe the supervisor module and I/O module features, fabric module capacity, and redundancy capability
  • Describe VOQ operation
  • Describe packet flow and arbitration across the fabric
  • Describe key features of the Cisco Nexus 7000 Switch power supplies and fan cooling systems
  • Describe key hardware high-availability features
  • Installing Cisco Nexus 7000 Series Switches
  • Perform the hardware installation
  • Verify the hardware installation using LEDs
  • Verify the hardware installation using show commands
  • Troubleshoot hardware issues
  • Configuring Device Administration and Management Features
  • Describe the management interfaces available on the Cisco Nexus 7000 Series Switch
  • Use the Cisco NX-OS setup utility to configure Cisco Nexus 7000 Series Switch connectivity for system management
  • Configure the user management feature on the Cisco Nexus 7000 Series Switch
  • Configure system management features on the Cisco Nexus 7000 Series Switch
  • Perform configuration backup and restore
  • Perform in-service software upgrades and downgrades
  • Perform Cisco NX-OS recovery
  • Perform an electronic programmable logic device (EPLD) image upgrade
  • Using the Troubleshooting Process and Tools
  • Describe the troubleshooting process that can be used to identify issues on the Cisco Nexus 7000 Series Switch
  • Identify the features that can be used to gather information on the Cisco Nexus 7000 Series Switch
  • Use the embedded Ethanalyzer feature on the Cisco Nexus 7000 Series Switch
  • Configure the SPAN feature on the Cisco Nexus 7000 Series Switch
  • Configure the NetFlow feature on the Cisco Nexus 7000 Series Switch
  • Configure system message logging on the Cisco Nexus 7000 Series Switch
  • Configure Cisco GOLD on the Cisco Nexus 7000 Series Switch
  • Use the OBFL feature to identify critical events that have occurred
  • Configure the RMON feature on the Cisco Nexus 7000 Series Switch
  • Configure Cisco EEM to respond to events that occur on the Cisco Nexus 7000 Series Switch

 
Lesson 3: Cisco Nexus 7000 Series Switch Software Architecture and Features

  • Describing Cisco NX-OS Software
  • Describe the Cisco NX-OS Software architecture
  • Identifying key features of the Cisco NX-OS Software
  • Survey Cisco NX-OS CLI basic commands
  • Explain licensing features of the Cisco Nexus 7000 Switch
  • Configuring Virtual Device Contexts on Cisco Nexus 7000 Series Switches
  • Explain the purpose and use of VDCs
  • Configure VDCs on the Cisco Nexus 7000 Switch
  • Configure VDC resource templates
  • Configure the management settings for VDCs
  • Configuring Layer 2 Switching Features
  • Configure basic interface parameters on Cisco Nexus 7000 Switch interfaces
  • Configure Layer 2 interfaces on the Cisco Nexus 7000 Switch
  • Configure VLANs on the Cisco Nexus 7000 Switch
  • Configure PVLANs on the Cisco Nexus 7000 Switch
  • Configure STP extensions on the Cisco Nexus 7000 Switch
  • Configure Q-in-Q VLAN tunnels on the Cisco Nexus 7000 Switch
  • Configuring Port Channels
  • Configure port channels on the Cisco Nexus 7000 Switch
  • Evaluate the use and benefits of vPCs in the network
  • Explain the architecture and components of vPCs
  • Configure vPCs on the Cisco Nexus 7000 Switch
  • Configuring the Cisco Nexus 7000 Series Switch with the Cisco Nexus 2000 Series Fabric Extender
  • Describe the Cisco Nexus 2000 Fabric Extenders
  • Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender supported topologies
  • Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender features
  • Configure Cisco Nexus 2000 Fabric Extenders
  • Configuring Cisco FabricPath
  • Describe Cisco FabricPath architecture
  • Explain Cisco FabricPath features on the Cisco Nexus 7000 Switch
  • Configure Cisco FabricPath in the data center architecture
  • Explain TRILL
  • Configuring Layer 3 Switching Features
  • Describe the unicast and multicast RIB and FIB on the Cisco Nexus 7000 Switch
  • Explain Layer 3 interaction from F1 to M1 I/O modules on the Cisco Nexus 7000 Switch
  • Configure the different routing protocols that are supported by the Cisco Nexus 7000 Switch
  • Configure BFD on the Cisco Nexus 7000 Switch
  • Configure the Route Policy Manager on the Cisco Nexus 7000 Switch
  • Configure Layer 3 virtualization on the Cisco Nexus 7000 Switch
  • Configure PBR on the Cisco Nexus 7000 Switch
  • Configure FHRPs on the Cisco Nexus 7000 Switch
  • Configure PIM-SM on the Cisco Nexus 7000 Switch
  • Troubleshooting Layer 2 and Layer 3
  • Verify Layer 2 issues on the Cisco Nexus 7000 Switch
  • Troubleshoot vPC issues on the Cisco Nexus 7000 Switch
  • Troubleshoot issues with Cisco FabricPath
  • Troubleshoot Layer 3 issues on the Cisco Nexus 7000 Switch
  • Configuring MPLS
  • Explain the terminology in an MPLS environment
  • Explain the MPLS features of the Cisco Nexus 7000 Switch
  • Configure the MPLS features on the Cisco Nexus 7000 Switch
  • Configuring Cisco OTV
  • Explain the terminology, network, and use of multihomed sites and load balancing in a Cisco OTV environment
  • Configure basic Cisco OTV features on the Cisco Nexus 7000 Switch
  • Configure advanced Cisco OTV features on the Cisco Nexus 7000 Switch
  • Configuring Locator/ID Separation Protocol
  • Describe the terminology in an LISP environment
  • Describe LISP features of the Cisco Nexus 7000 Series Switch
  • Configure LISP features on the Cisco Nexus 7000 Series Switch
  • Configuring FCoE
  • Describe the terminology in an FCoE environment
  • Describe FCoE features on the Cisco Nexus 7000 Series Switch
  • Configure FCoE features on the Cisco Nexus 7000 Series Switch
  • Configuring Security Features
  • Identify the security features that are available on the Cisco Nexus 7000 Switch
  • Configure ACLs on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure port security on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure DHCP snooping on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure DAI on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure IP Source Guard on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure uRPF on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure traffic storm control on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure CoPP on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure Cisco TrustSec on the Cisco Nexus 7000 Switch and verify the configuration
  • Configuring QoS
  • Identify the purpose of QoS
  • Explain how QoS is implemented on the Cisco Nexus 7000 Switch and the default behaviors
  • Configure QoS features with MQC
  • Configure QoS classification on the Cisco Nexus 7000 Switch
  • Configure marking for QoS on the Cisco Nexus 7000 Switch
  • Configure mutation mapping for QoS on the Cisco Nexus 7000 Switch
  • Configure QoS policing on the Cisco Nexus 7000 Switch
  • Configure QoS queuing and scheduling on the Cisco Nexus 7000 Switch
  • Configure network QoS, queuing and scheduling, and priority flow control on Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet modules
  • Monitor QoS statistics on the Cisco Nexus 7000 Switch
  • Troubleshooting Memory and Packet Flow Issues
  • Evaluate Cisco Nexus 7000 Switch memory using the built-in platform monitoring tool
  • Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a high level
  • Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a detailed level
  • Troubleshoot packet flow issues on the Cisco Nexus 7000 Switch

 
Lab Outline

  • Lab 2-1: Cisco Nexus 7000 Platform Discovery
  • Lab 2-2: Configuring User Management
  • Lab 2-3: Configuring System Management
  • Lab 2-4: Configuring Troubleshooting Features
  • Lab 3-1: Configuring Layer 2 Switching
  • Lab 3-2: Configuring Virtual Port Channels
  • Lab 3-3: Configuring Cisco FabricPath
  • Lab 3-4: Configuring Layer 3 Switching
  • Lab 3-5: Configuring FHRP
  • Lab 3-6: Troubleshooting vPCs and Cisco FabricPath
  • Lab 3-7: Configuring MPLS
  • Lab 3-8: Configuring Cisco OTV
  • Lab 3-9: Configuring LISP
  • Lab 3-10: Configuring FCoE
  • Lab 3-11: Configuring Security Features
  • Lab 3-12: Configuring QoS
- See more at: http://www.techsherpas.com/courses/data-center-storage/configuring-cisco-nexus-7000-switches-v2.1#sthash.KsLBvBjB.dpuf

Lesson 1: Describing Cisco Nexus 7000 Series Switches

  • Describing the Cisco Nexus 7000 Switch
  • Describe data center requirements that are addressed by the Cisco Nexus 7000 Switch
  • Describe the key unified fabric features
  • Describe the Cisco Nexus product family
  • Describing Cisco Nexus 7000 Series Switch Features in General
  • Describe the Cisco NX-OS software features
  • Describe the key features of the Cisco Nexus 7000 Switch
  • Describing the Cisco Nexus 7000 Switch Deployment Models
  • Describe Cisco Nexus 7000 Series Switch deployment models
  • Access the correct reference materials when required (useful links: Cisco.com, product websites)

 
Lesson 2: Cisco Nexus 7000 Series Switch Hardware Architecture, Device Installation, and Administration Features

  • Describing Cisco Nexus 7000 Series Switch Hardware Architecture
  • Describe the Cisco Nexus 7000 Switch chassis
  • Describe the supervisor module and I/O module features, fabric module capacity, and redundancy capability
  • Describe VOQ operation
  • Describe packet flow and arbitration across the fabric
  • Describe key features of the Cisco Nexus 7000 Switch power supplies and fan cooling systems
  • Describe key hardware high-availability features
  • Installing Cisco Nexus 7000 Series Switches
  • Perform the hardware installation
  • Verify the hardware installation using LEDs
  • Verify the hardware installation using show commands
  • Troubleshoot hardware issues
  • Configuring Device Administration and Management Features
  • Describe the management interfaces available on the Cisco Nexus 7000 Series Switch
  • Use the Cisco NX-OS setup utility to configure Cisco Nexus 7000 Series Switch connectivity for system management
  • Configure the user management feature on the Cisco Nexus 7000 Series Switch
  • Configure system management features on the Cisco Nexus 7000 Series Switch
  • Perform configuration backup and restore
  • Perform in-service software upgrades and downgrades
  • Perform Cisco NX-OS recovery
  • Perform an electronic programmable logic device (EPLD) image upgrade
  • Using the Troubleshooting Process and Tools
  • Describe the troubleshooting process that can be used to identify issues on the Cisco Nexus 7000 Series Switch
  • Identify the features that can be used to gather information on the Cisco Nexus 7000 Series Switch
  • Use the embedded Ethanalyzer feature on the Cisco Nexus 7000 Series Switch
  • Configure the SPAN feature on the Cisco Nexus 7000 Series Switch
  • Configure the NetFlow feature on the Cisco Nexus 7000 Series Switch
  • Configure system message logging on the Cisco Nexus 7000 Series Switch
  • Configure Cisco GOLD on the Cisco Nexus 7000 Series Switch
  • Use the OBFL feature to identify critical events that have occurred
  • Configure the RMON feature on the Cisco Nexus 7000 Series Switch
  • Configure Cisco EEM to respond to events that occur on the Cisco Nexus 7000 Series Switch

 
Lesson 3: Cisco Nexus 7000 Series Switch Software Architecture and Features

  • Describing Cisco NX-OS Software
  • Describe the Cisco NX-OS Software architecture
  • Identifying key features of the Cisco NX-OS Software
  • Survey Cisco NX-OS CLI basic commands
  • Explain licensing features of the Cisco Nexus 7000 Switch
  • Configuring Virtual Device Contexts on Cisco Nexus 7000 Series Switches
  • Explain the purpose and use of VDCs
  • Configure VDCs on the Cisco Nexus 7000 Switch
  • Configure VDC resource templates
  • Configure the management settings for VDCs
  • Configuring Layer 2 Switching Features
  • Configure basic interface parameters on Cisco Nexus 7000 Switch interfaces
  • Configure Layer 2 interfaces on the Cisco Nexus 7000 Switch
  • Configure VLANs on the Cisco Nexus 7000 Switch
  • Configure PVLANs on the Cisco Nexus 7000 Switch
  • Configure STP extensions on the Cisco Nexus 7000 Switch
  • Configure Q-in-Q VLAN tunnels on the Cisco Nexus 7000 Switch
  • Configuring Port Channels
  • Configure port channels on the Cisco Nexus 7000 Switch
  • Evaluate the use and benefits of vPCs in the network
  • Explain the architecture and components of vPCs
  • Configure vPCs on the Cisco Nexus 7000 Switch
  • Configuring the Cisco Nexus 7000 Series Switch with the Cisco Nexus 2000 Series Fabric Extender
  • Describe the Cisco Nexus 2000 Fabric Extenders
  • Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender supported topologies
  • Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender features
  • Configure Cisco Nexus 2000 Fabric Extenders
  • Configuring Cisco FabricPath
  • Describe Cisco FabricPath architecture
  • Explain Cisco FabricPath features on the Cisco Nexus 7000 Switch
  • Configure Cisco FabricPath in the data center architecture
  • Explain TRILL
  • Configuring Layer 3 Switching Features
  • Describe the unicast and multicast RIB and FIB on the Cisco Nexus 7000 Switch
  • Explain Layer 3 interaction from F1 to M1 I/O modules on the Cisco Nexus 7000 Switch
  • Configure the different routing protocols that are supported by the Cisco Nexus 7000 Switch
  • Configure BFD on the Cisco Nexus 7000 Switch
  • Configure the Route Policy Manager on the Cisco Nexus 7000 Switch
  • Configure Layer 3 virtualization on the Cisco Nexus 7000 Switch
  • Configure PBR on the Cisco Nexus 7000 Switch
  • Configure FHRPs on the Cisco Nexus 7000 Switch
  • Configure PIM-SM on the Cisco Nexus 7000 Switch
  • Troubleshooting Layer 2 and Layer 3
  • Verify Layer 2 issues on the Cisco Nexus 7000 Switch
  • Troubleshoot vPC issues on the Cisco Nexus 7000 Switch
  • Troubleshoot issues with Cisco FabricPath
  • Troubleshoot Layer 3 issues on the Cisco Nexus 7000 Switch
  • Configuring MPLS
  • Explain the terminology in an MPLS environment
  • Explain the MPLS features of the Cisco Nexus 7000 Switch
  • Configure the MPLS features on the Cisco Nexus 7000 Switch
  • Configuring Cisco OTV
  • Explain the terminology, network, and use of multihomed sites and load balancing in a Cisco OTV environment
  • Configure basic Cisco OTV features on the Cisco Nexus 7000 Switch
  • Configure advanced Cisco OTV features on the Cisco Nexus 7000 Switch
  • Configuring Locator/ID Separation Protocol
  • Describe the terminology in an LISP environment
  • Describe LISP features of the Cisco Nexus 7000 Series Switch
  • Configure LISP features on the Cisco Nexus 7000 Series Switch
  • Configuring FCoE
  • Describe the terminology in an FCoE environment
  • Describe FCoE features on the Cisco Nexus 7000 Series Switch
  • Configure FCoE features on the Cisco Nexus 7000 Series Switch
  • Configuring Security Features
  • Identify the security features that are available on the Cisco Nexus 7000 Switch
  • Configure ACLs on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure port security on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure DHCP snooping on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure DAI on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure IP Source Guard on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure uRPF on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure traffic storm control on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure CoPP on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure Cisco TrustSec on the Cisco Nexus 7000 Switch and verify the configuration
  • Configuring QoS
  • Identify the purpose of QoS
  • Explain how QoS is implemented on the Cisco Nexus 7000 Switch and the default behaviors
  • Configure QoS features with MQC
  • Configure QoS classification on the Cisco Nexus 7000 Switch
  • Configure marking for QoS on the Cisco Nexus 7000 Switch
  • Configure mutation mapping for QoS on the Cisco Nexus 7000 Switch
  • Configure QoS policing on the Cisco Nexus 7000 Switch
  • Configure QoS queuing and scheduling on the Cisco Nexus 7000 Switch
  • Configure network QoS, queuing and scheduling, and priority flow control on Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet modules
  • Monitor QoS statistics on the Cisco Nexus 7000 Switch
  • Troubleshooting Memory and Packet Flow Issues
  • Evaluate Cisco Nexus 7000 Switch memory using the built-in platform monitoring tool
  • Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a high level
  • Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a detailed level
  • Troubleshoot packet flow issues on the Cisco Nexus 7000 Switch

 
Lab Outline

  • Lab 2-1: Cisco Nexus 7000 Platform Discovery
  • Lab 2-2: Configuring User Management
  • Lab 2-3: Configuring System Management
  • Lab 2-4: Configuring Troubleshooting Features
  • Lab 3-1: Configuring Layer 2 Switching
  • Lab 3-2: Configuring Virtual Port Channels
  • Lab 3-3: Configuring Cisco FabricPath
  • Lab 3-4: Configuring Layer 3 Switching
  • Lab 3-5: Configuring FHRP
  • Lab 3-6: Troubleshooting vPCs and Cisco FabricPath
  • Lab 3-7: Configuring MPLS
  • Lab 3-8: Configuring Cisco OTV
  • Lab 3-9: Configuring LISP
  • Lab 3-10: Configuring FCoE
  • Lab 3-11: Configuring Security Features
  • Lab 3-12: Configuring QoS
- See more at: http://www.techsherpas.com/courses/data-center-storage/configuring-cisco-nexus-7000-switches-v2.1#sthash.KsLBvBjB.dpuf

Lesson 1: Describing Cisco Nexus 7000 Series Switches

  • Describing the Cisco Nexus 7000 Switch
  • Describe data center requirements that are addressed by the Cisco Nexus 7000 Switch
  • Describe the key unified fabric features
  • Describe the Cisco Nexus product family
  • Describing Cisco Nexus 7000 Series Switch Features in General
  • Describe the Cisco NX-OS software features
  • Describe the key features of the Cisco Nexus 7000 Switch
  • Describing the Cisco Nexus 7000 Switch Deployment Models
  • Describe Cisco Nexus 7000 Series Switch deployment models
  • Access the correct reference materials when required (useful links: Cisco.com, product websites)

 
Lesson 2: Cisco Nexus 7000 Series Switch Hardware Architecture, Device Installation, and Administration Features

  • Describing Cisco Nexus 7000 Series Switch Hardware Architecture
  • Describe the Cisco Nexus 7000 Switch chassis
  • Describe the supervisor module and I/O module features, fabric module capacity, and redundancy capability
  • Describe VOQ operation
  • Describe packet flow and arbitration across the fabric
  • Describe key features of the Cisco Nexus 7000 Switch power supplies and fan cooling systems
  • Describe key hardware high-availability features
  • Installing Cisco Nexus 7000 Series Switches
  • Perform the hardware installation
  • Verify the hardware installation using LEDs
  • Verify the hardware installation using show commands
  • Troubleshoot hardware issues
  • Configuring Device Administration and Management Features
  • Describe the management interfaces available on the Cisco Nexus 7000 Series Switch
  • Use the Cisco NX-OS setup utility to configure Cisco Nexus 7000 Series Switch connectivity for system management
  • Configure the user management feature on the Cisco Nexus 7000 Series Switch
  • Configure system management features on the Cisco Nexus 7000 Series Switch
  • Perform configuration backup and restore
  • Perform in-service software upgrades and downgrades
  • Perform Cisco NX-OS recovery
  • Perform an electronic programmable logic device (EPLD) image upgrade
  • Using the Troubleshooting Process and Tools
  • Describe the troubleshooting process that can be used to identify issues on the Cisco Nexus 7000 Series Switch
  • Identify the features that can be used to gather information on the Cisco Nexus 7000 Series Switch
  • Use the embedded Ethanalyzer feature on the Cisco Nexus 7000 Series Switch
  • Configure the SPAN feature on the Cisco Nexus 7000 Series Switch
  • Configure the NetFlow feature on the Cisco Nexus 7000 Series Switch
  • Configure system message logging on the Cisco Nexus 7000 Series Switch
  • Configure Cisco GOLD on the Cisco Nexus 7000 Series Switch
  • Use the OBFL feature to identify critical events that have occurred
  • Configure the RMON feature on the Cisco Nexus 7000 Series Switch
  • Configure Cisco EEM to respond to events that occur on the Cisco Nexus 7000 Series Switch

 
Lesson 3: Cisco Nexus 7000 Series Switch Software Architecture and Features

  • Describing Cisco NX-OS Software
  • Describe the Cisco NX-OS Software architecture
  • Identifying key features of the Cisco NX-OS Software
  • Survey Cisco NX-OS CLI basic commands
  • Explain licensing features of the Cisco Nexus 7000 Switch
  • Configuring Virtual Device Contexts on Cisco Nexus 7000 Series Switches
  • Explain the purpose and use of VDCs
  • Configure VDCs on the Cisco Nexus 7000 Switch
  • Configure VDC resource templates
  • Configure the management settings for VDCs
  • Configuring Layer 2 Switching Features
  • Configure basic interface parameters on Cisco Nexus 7000 Switch interfaces
  • Configure Layer 2 interfaces on the Cisco Nexus 7000 Switch
  • Configure VLANs on the Cisco Nexus 7000 Switch
  • Configure PVLANs on the Cisco Nexus 7000 Switch
  • Configure STP extensions on the Cisco Nexus 7000 Switch
  • Configure Q-in-Q VLAN tunnels on the Cisco Nexus 7000 Switch
  • Configuring Port Channels
  • Configure port channels on the Cisco Nexus 7000 Switch
  • Evaluate the use and benefits of vPCs in the network
  • Explain the architecture and components of vPCs
  • Configure vPCs on the Cisco Nexus 7000 Switch
  • Configuring the Cisco Nexus 7000 Series Switch with the Cisco Nexus 2000 Series Fabric Extender
  • Describe the Cisco Nexus 2000 Fabric Extenders
  • Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender supported topologies
  • Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender features
  • Configure Cisco Nexus 2000 Fabric Extenders
  • Configuring Cisco FabricPath
  • Describe Cisco FabricPath architecture
  • Explain Cisco FabricPath features on the Cisco Nexus 7000 Switch
  • Configure Cisco FabricPath in the data center architecture
  • Explain TRILL
  • Configuring Layer 3 Switching Features
  • Describe the unicast and multicast RIB and FIB on the Cisco Nexus 7000 Switch
  • Explain Layer 3 interaction from F1 to M1 I/O modules on the Cisco Nexus 7000 Switch
  • Configure the different routing protocols that are supported by the Cisco Nexus 7000 Switch
  • Configure BFD on the Cisco Nexus 7000 Switch
  • Configure the Route Policy Manager on the Cisco Nexus 7000 Switch
  • Configure Layer 3 virtualization on the Cisco Nexus 7000 Switch
  • Configure PBR on the Cisco Nexus 7000 Switch
  • Configure FHRPs on the Cisco Nexus 7000 Switch
  • Configure PIM-SM on the Cisco Nexus 7000 Switch
  • Troubleshooting Layer 2 and Layer 3
  • Verify Layer 2 issues on the Cisco Nexus 7000 Switch
  • Troubleshoot vPC issues on the Cisco Nexus 7000 Switch
  • Troubleshoot issues with Cisco FabricPath
  • Troubleshoot Layer 3 issues on the Cisco Nexus 7000 Switch
  • Configuring MPLS
  • Explain the terminology in an MPLS environment
  • Explain the MPLS features of the Cisco Nexus 7000 Switch
  • Configure the MPLS features on the Cisco Nexus 7000 Switch
  • Configuring Cisco OTV
  • Explain the terminology, network, and use of multihomed sites and load balancing in a Cisco OTV environment
  • Configure basic Cisco OTV features on the Cisco Nexus 7000 Switch
  • Configure advanced Cisco OTV features on the Cisco Nexus 7000 Switch
  • Configuring Locator/ID Separation Protocol
  • Describe the terminology in an LISP environment
  • Describe LISP features of the Cisco Nexus 7000 Series Switch
  • Configure LISP features on the Cisco Nexus 7000 Series Switch
  • Configuring FCoE
  • Describe the terminology in an FCoE environment
  • Describe FCoE features on the Cisco Nexus 7000 Series Switch
  • Configure FCoE features on the Cisco Nexus 7000 Series Switch
  • Configuring Security Features
  • Identify the security features that are available on the Cisco Nexus 7000 Switch
  • Configure ACLs on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure port security on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure DHCP snooping on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure DAI on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure IP Source Guard on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure uRPF on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure traffic storm control on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure CoPP on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure Cisco TrustSec on the Cisco Nexus 7000 Switch and verify the configuration
  • Configuring QoS
  • Identify the purpose of QoS
  • Explain how QoS is implemented on the Cisco Nexus 7000 Switch and the default behaviors
  • Configure QoS features with MQC
  • Configure QoS classification on the Cisco Nexus 7000 Switch
  • Configure marking for QoS on the Cisco Nexus 7000 Switch
  • Configure mutation mapping for QoS on the Cisco Nexus 7000 Switch
  • Configure QoS policing on the Cisco Nexus 7000 Switch
  • Configure QoS queuing and scheduling on the Cisco Nexus 7000 Switch
  • Configure network QoS, queuing and scheduling, and priority flow control on Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet modules
  • Monitor QoS statistics on the Cisco Nexus 7000 Switch
  • Troubleshooting Memory and Packet Flow Issues
  • Evaluate Cisco Nexus 7000 Switch memory using the built-in platform monitoring tool
  • Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a high level
  • Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a detailed level
  • Troubleshoot packet flow issues on the Cisco Nexus 7000 Switch

 
Lab Outline

  • Lab 2-1: Cisco Nexus 7000 Platform Discovery
  • Lab 2-2: Configuring User Management
  • Lab 2-3: Configuring System Management
  • Lab 2-4: Configuring Troubleshooting Features
  • Lab 3-1: Configuring Layer 2 Switching
  • Lab 3-2: Configuring Virtual Port Channels
  • Lab 3-3: Configuring Cisco FabricPath
  • Lab 3-4: Configuring Layer 3 Switching
  • Lab 3-5: Configuring FHRP
  • Lab 3-6: Troubleshooting vPCs and Cisco FabricPath
  • Lab 3-7: Configuring MPLS
  • Lab 3-8: Configuring Cisco OTV
  • Lab 3-9: Configuring LISP
  • Lab 3-10: Configuring FCoE
  • Lab 3-11: Configuring Security Features
  • Lab 3-12: Configuring QoS
- See more at: http://www.techsherpas.com/courses/data-center-storage/configuring-cisco-nexus-7000-switches-v2.1#sthash.KsLBvBjB.dpuf

Lesson 1: Describing Cisco Nexus 7000 Series Switches

  • Describing the Cisco Nexus 7000 Switch
  • Describe data center requirements that are addressed by the Cisco Nexus 7000 Switch
  • Describe the key unified fabric features
  • Describe the Cisco Nexus product family
  • Describing Cisco Nexus 7000 Series Switch Features in General
  • Describe the Cisco NX-OS software features
  • Describe the key features of the Cisco Nexus 7000 Switch
  • Describing the Cisco Nexus 7000 Switch Deployment Models
  • Describe Cisco Nexus 7000 Series Switch deployment models
  • Access the correct reference materials when required (useful links: Cisco.com, product websites)

 
Lesson 2: Cisco Nexus 7000 Series Switch Hardware Architecture, Device Installation, and Administration Features

  • Describing Cisco Nexus 7000 Series Switch Hardware Architecture
  • Describe the Cisco Nexus 7000 Switch chassis
  • Describe the supervisor module and I/O module features, fabric module capacity, and redundancy capability
  • Describe VOQ operation
  • Describe packet flow and arbitration across the fabric
  • Describe key features of the Cisco Nexus 7000 Switch power supplies and fan cooling systems
  • Describe key hardware high-availability features
  • Installing Cisco Nexus 7000 Series Switches
  • Perform the hardware installation
  • Verify the hardware installation using LEDs
  • Verify the hardware installation using show commands
  • Troubleshoot hardware issues
  • Configuring Device Administration and Management Features
  • Describe the management interfaces available on the Cisco Nexus 7000 Series Switch
  • Use the Cisco NX-OS setup utility to configure Cisco Nexus 7000 Series Switch connectivity for system management
  • Configure the user management feature on the Cisco Nexus 7000 Series Switch
  • Configure system management features on the Cisco Nexus 7000 Series Switch
  • Perform configuration backup and restore
  • Perform in-service software upgrades and downgrades
  • Perform Cisco NX-OS recovery
  • Perform an electronic programmable logic device (EPLD) image upgrade
  • Using the Troubleshooting Process and Tools
  • Describe the troubleshooting process that can be used to identify issues on the Cisco Nexus 7000 Series Switch
  • Identify the features that can be used to gather information on the Cisco Nexus 7000 Series Switch
  • Use the embedded Ethanalyzer feature on the Cisco Nexus 7000 Series Switch
  • Configure the SPAN feature on the Cisco Nexus 7000 Series Switch
  • Configure the NetFlow feature on the Cisco Nexus 7000 Series Switch
  • Configure system message logging on the Cisco Nexus 7000 Series Switch
  • Configure Cisco GOLD on the Cisco Nexus 7000 Series Switch
  • Use the OBFL feature to identify critical events that have occurred
  • Configure the RMON feature on the Cisco Nexus 7000 Series Switch
  • Configure Cisco EEM to respond to events that occur on the Cisco Nexus 7000 Series Switch

 
Lesson 3: Cisco Nexus 7000 Series Switch Software Architecture and Features

  • Describing Cisco NX-OS Software
  • Describe the Cisco NX-OS Software architecture
  • Identifying key features of the Cisco NX-OS Software
  • Survey Cisco NX-OS CLI basic commands
  • Explain licensing features of the Cisco Nexus 7000 Switch
  • Configuring Virtual Device Contexts on Cisco Nexus 7000 Series Switches
  • Explain the purpose and use of VDCs
  • Configure VDCs on the Cisco Nexus 7000 Switch
  • Configure VDC resource templates
  • Configure the management settings for VDCs
  • Configuring Layer 2 Switching Features
  • Configure basic interface parameters on Cisco Nexus 7000 Switch interfaces
  • Configure Layer 2 interfaces on the Cisco Nexus 7000 Switch
  • Configure VLANs on the Cisco Nexus 7000 Switch
  • Configure PVLANs on the Cisco Nexus 7000 Switch
  • Configure STP extensions on the Cisco Nexus 7000 Switch
  • Configure Q-in-Q VLAN tunnels on the Cisco Nexus 7000 Switch
  • Configuring Port Channels
  • Configure port channels on the Cisco Nexus 7000 Switch
  • Evaluate the use and benefits of vPCs in the network
  • Explain the architecture and components of vPCs
  • Configure vPCs on the Cisco Nexus 7000 Switch
  • Configuring the Cisco Nexus 7000 Series Switch with the Cisco Nexus 2000 Series Fabric Extender
  • Describe the Cisco Nexus 2000 Fabric Extenders
  • Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender supported topologies
  • Describe the Cisco Nexus 7000 Switch and Cisco Nexus 2000 Fabric Extender features
  • Configure Cisco Nexus 2000 Fabric Extenders
  • Configuring Cisco FabricPath
  • Describe Cisco FabricPath architecture
  • Explain Cisco FabricPath features on the Cisco Nexus 7000 Switch
  • Configure Cisco FabricPath in the data center architecture
  • Explain TRILL
  • Configuring Layer 3 Switching Features
  • Describe the unicast and multicast RIB and FIB on the Cisco Nexus 7000 Switch
  • Explain Layer 3 interaction from F1 to M1 I/O modules on the Cisco Nexus 7000 Switch
  • Configure the different routing protocols that are supported by the Cisco Nexus 7000 Switch
  • Configure BFD on the Cisco Nexus 7000 Switch
  • Configure the Route Policy Manager on the Cisco Nexus 7000 Switch
  • Configure Layer 3 virtualization on the Cisco Nexus 7000 Switch
  • Configure PBR on the Cisco Nexus 7000 Switch
  • Configure FHRPs on the Cisco Nexus 7000 Switch
  • Configure PIM-SM on the Cisco Nexus 7000 Switch
  • Troubleshooting Layer 2 and Layer 3
  • Verify Layer 2 issues on the Cisco Nexus 7000 Switch
  • Troubleshoot vPC issues on the Cisco Nexus 7000 Switch
  • Troubleshoot issues with Cisco FabricPath
  • Troubleshoot Layer 3 issues on the Cisco Nexus 7000 Switch
  • Configuring MPLS
  • Explain the terminology in an MPLS environment
  • Explain the MPLS features of the Cisco Nexus 7000 Switch
  • Configure the MPLS features on the Cisco Nexus 7000 Switch
  • Configuring Cisco OTV
  • Explain the terminology, network, and use of multihomed sites and load balancing in a Cisco OTV environment
  • Configure basic Cisco OTV features on the Cisco Nexus 7000 Switch
  • Configure advanced Cisco OTV features on the Cisco Nexus 7000 Switch
  • Configuring Locator/ID Separation Protocol
  • Describe the terminology in an LISP environment
  • Describe LISP features of the Cisco Nexus 7000 Series Switch
  • Configure LISP features on the Cisco Nexus 7000 Series Switch
  • Configuring FCoE
  • Describe the terminology in an FCoE environment
  • Describe FCoE features on the Cisco Nexus 7000 Series Switch
  • Configure FCoE features on the Cisco Nexus 7000 Series Switch
  • Configuring Security Features
  • Identify the security features that are available on the Cisco Nexus 7000 Switch
  • Configure ACLs on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure port security on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure DHCP snooping on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure DAI on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure IP Source Guard on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure uRPF on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure traffic storm control on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure CoPP on the Cisco Nexus 7000 Switch and verify the configuration
  • Configure Cisco TrustSec on the Cisco Nexus 7000 Switch and verify the configuration
  • Configuring QoS
  • Identify the purpose of QoS
  • Explain how QoS is implemented on the Cisco Nexus 7000 Switch and the default behaviors
  • Configure QoS features with MQC
  • Configure QoS classification on the Cisco Nexus 7000 Switch
  • Configure marking for QoS on the Cisco Nexus 7000 Switch
  • Configure mutation mapping for QoS on the Cisco Nexus 7000 Switch
  • Configure QoS policing on the Cisco Nexus 7000 Switch
  • Configure QoS queuing and scheduling on the Cisco Nexus 7000 Switch
  • Configure network QoS, queuing and scheduling, and priority flow control on Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet modules
  • Monitor QoS statistics on the Cisco Nexus 7000 Switch
  • Troubleshooting Memory and Packet Flow Issues
  • Evaluate Cisco Nexus 7000 Switch memory using the built-in platform monitoring tool
  • Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a high level
  • Evaluate platform memory utilization on the Cisco Nexus 7000 Switch on a detailed level
  • Troubleshoot packet flow issues on the Cisco Nexus 7000 Switch

 
Lab Outline

  • Lab 2-1: Cisco Nexus 7000 Platform Discovery
  • Lab 2-2: Configuring User Management
  • Lab 2-3: Configuring System Management
  • Lab 2-4: Configuring Troubleshooting Features
  • Lab 3-1: Configuring Layer 2 Switching
  • Lab 3-2: Configuring Virtual Port Channels
  • Lab 3-3: Configuring Cisco FabricPath
  • Lab 3-4: Configuring Layer 3 Switching
  • Lab 3-5: Configuring FHRP
  • Lab 3-6: Troubleshooting vPCs and Cisco FabricPath
  • Lab 3-7: Configuring MPLS
  • Lab 3-8: Configuring Cisco OTV
  • Lab 3-9: Configuring LISP
  • Lab 3-10: Configuring FCoE
  • Lab 3-11: Configuring Security Features
  • Lab 3-12: Configuring QoS
- See more at: http://www.techsherpas.com/courses/data-center-storage/configuring-cisco-nexus-7000-switches-v2.1#sthash.KsLBvBjB.dpuf

Training locations

Configuring Cisco Nexus 7000 Switches v3 training across the U.S. and beyond.

We provide Configuring Cisco Nexus 7000 Switches v3 training onsite and live online for organizations throughout the United States and internationally.

View all Configuring Cisco Nexus 7000 Switches v3 training locations

Train your team with HSG

Private, instructor-led training customized for your organization.

  • Onsite or live online delivery
  • Customized curriculum
  • Training for groups of 3 or more
  • Flexible scheduling
  • Experienced instructors
Request a Training Proposal

Questions? Call us at 303.377.6176
or email info@hartmannsoftware.com

Browse all VMWare courses →

Ready to train your team?

Let's customize this training for your organization.

Tell us about your employees, your goals, and your preferred schedule. We'll prepare a training proposal covering scope, delivery format, and pricing.

Request a Training Proposal

or call 303.377.6176